07-12-2004 04:37 AM - last edited on 03-24-2013 06:51 PM by Cathy_xu
Could someone please tell me where to find description of beep codes for EVO n160.
I executed windows XP installer, installation halted and after shut down and start, notebook stoped working. Display is not working. On start I got one long beep. After that notebook repeats long beep and two short beeps. BIOS is accessing floppy drive and if I insert boot floppy it seems like it load just first sector and then beeping stops and computer halts. Notebook had Phoenix BIOS, but I do not know exactly what version. I tried to remove CMOS backup baterry but it does not help.
P.S.This thread has been moved from Archived Desktops and Workstations Boards>general to Notebook PC - Omnibooks, EVO- HP Forums Moderator
07-13-2004 12:05 AM
You could also post this question over on the EVO Category:
The experts there will have some suggestions for you,
Hope this helps,
07-13-2004 05:54 PM
Here a way to the manuals :
You should find the necessary info in there.
Alexander M. Ermes
07-13-2004 07:04 PM
Thanks for reply, I will be posting to notebook forum.
I already read those manuals but there is nothing about beep codes. There is just general info.
I found beep code description on phoenix site for Phoenix bios 4.0 revision 6, but i don't know if I can apply those codes to EVO 160 notebook. One long beep and two short beeps means "Search option ROMS, beep on checksum failure".