NX9010 wireless switch doesn't work, HELP ! (379 Views)
Reply
Occasional Visitor
ruddy_2
Posts: 3
Registered: ‎12-27-2004
Message 1 of 6 (379 Views)

NX9010 wireless switch doesn't work, HELP !

the switch under the keyboard doesn't work at all, it turn on the light and the switch botton of mute speaker as well.

help .... any solution ?
what cause this and how to prevent ?

regards
ruddy
Please use plain text.
Honored Contributor
Clinton Tam
Posts: 4,201
Registered: ‎10-03-2002
Message 2 of 6 (379 Views)

Re: NX9010 wireless switch doesn't work, HELP !

I maybe a little bit slow during the X'mas holiday and I have problem really understand your questions.

1. What switch under the keyboard doesn't work? Do you meant Wireless switch ?

2. Are you having problem with all the OneTouch utility and Notebook Utilities?

As for the problem for some of the OneTouch buttons, you may need to perform the following steps as listed below:

It is painful but it works.

1. Uninstall the Notebook Utilities from Add/Remove Programs.

2. Uninstall the One Touch software.

3. Reboot.

4. Reinstall One Touch Software.

http://h18007.www1.hp.com/support/files/hpcpqnk/us/download/17837.html

5. Reboot.

6. Apparently the One Touch doesn't enable all the buttons on the ze53XX/nx9010 unless the Notebook Utilities software is loaded last. If the utilities are loaded first, One Touch breaks it.

Download Notebook Utilites from here and install.
http://h18007.www1.hp.com/support/files/hpcpqnk/us/download/20458.html

7. Reboot.
Please use plain text.
Occasional Visitor
ruddy_2
Posts: 3
Registered: ‎12-27-2004
Message 3 of 6 (379 Views)

Re: NX9010 wireless switch doesn't work, HELP !

yes it's a wireless botton/switch with led on top of it.
it won;t work and also the mute speaker switch also.

i'll do what you said first.
re install the util/one touch see what happend.

thanks man
ruddy

ps i'll get back after i install the util
Please use plain text.
Occasional Visitor
ruddy_2
Posts: 3
Registered: ‎12-27-2004
Message 4 of 6 (379 Views)

Re: NX9010 wireless switch doesn't work, HELP !

it works after i reinstall one touch.
thanks to you.

now ia hsve a problem that it won't detect any Access Point. on my other laptop shows 2 AP, but on my 9010 none.

i have to find what's the problem.
thanks
Please use plain text.
Honored Contributor
Clinton Tam
Posts: 4,201
Registered: ‎10-03-2002
Message 5 of 6 (379 Views)

Re: NX9010 wireless switch doesn't work, HELP !

Do you have the correct Wireless Driver?

From your Device Manager, do you see any Yellow Mark in your Network adapters?

In order to connect to any wireless network, you first need to turn on the wireless switch ( The Blue LED for wireless should be ON ) and the correct Wireless Card driver.

1. From your Control Panel, select Network Connections
2. From Network Connections, right click on Wireless Network Connection and select Properties to bring up Wireless Network Connection Properties.
3. From Wireless Network Connection Properties window, select Wireless Networks tab.
4. From the Preferred networks sub-window, do you see any AP?
5. Select View Wireless Networks in the Available networks sub-window and select Refresh network list.

Please use plain text.
Occasional Visitor
Kristian_6
Posts: 1
Registered: ‎01-25-2005
Message 6 of 6 (379 Views)

Re: NX9010 wireless switch doesn't work, HELP !

Hi Mr. Rudy,
I also have a problem with NX9010. Whenever the unit is in standby mode, if i press the power button or any key to go back to original state, unit doesn't respond. I already updated the bios and also run the winflash, still doesn't work. The system board was also replaced. Pls help. OS already been reinstalled.

Hope to hear from you soon.

Thanks

Kristian
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation