02-11-2014 07:31 AM - last edited on 02-12-2014 12:45 AM by Lisa198503
I have a machine running hp-ux 11vi3 patched with march 2013 QPK, but everytime we reboot it the local IP address is blank, we APA setup for networking and the netconf file appears to have th correct information in it.
What else can i check to see why i am having this problem?
P.S. This thread has been moved from HP-UX>System Administration to HP-UX > networking. -HP Forum Moderator
Solved! Go to Solution.
02-11-2014 07:35 AM - edited 02-11-2014 07:46 AM
The APA config itself?
Try "hpsum" to check the settings. Maybe they are not permanent?
Do you have more than 1 netconf file, like a netconf.old?
# nwmgr -S apa
show the correct configuration after a reboot?
Any message in rc.log file?
Hope this helps!
There are only 10 types of people in the world -
those who understand binary, and those who don't.
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
02-11-2014 10:38 AM
here is what nwmgr -s apa showed me, everythign looks ok
nwmgr -S apa
Class Mode Load Speed- Membership
Instance Balancing Duplex
======== =========== ========= ==================== ===========================
lan900 LACP_AUTO LB_MAC 2 Gbps Full Duplex 2,5
lan901 LACP_AUTO LB_MAC 2 Gbps Full Duplex 1,4
02-11-2014 10:50 AM