Unable to create new APA (145 Views)
Reply
Occasional Advisor
Tribute2U
Posts: 14
Registered: ‎11-05-2009
Message 1 of 4 (145 Views)
Accepted Solution

Unable to create new APA

Hi,

 

I try to configure a 2nd APA on my HP-UX 11.31 but unsuccessfull.

 

No problem to create the first one : lan900 (lan0 + lan1)

 

THe 2nd : lan901 (lan2 + lan3)

 

<my_server> nwmgr -S apa
Class Mode Load Speed- Membership
Instance Balancing Duplex
======== =========== ========= ==================== ===========================
lan900 MANUAL LB_MAC 20 Gbps Full Duplex 0,1
lan901 Not_Enabled LB_MAC 0 Mbps -
lan902 Not_Enabled LB_MAC 0 Mbps -
lan903 Not_Enabled LB_MAC 0 Mbps -
lan904 Not_Enabled LB_MAC 0 Mbps -

 

<my_server> nwmgr

Name/ Interface Station Sub- Interface Related
ClassInstance State Address system Type Interface
============== ========= ============== ======== ============== =========
lan0 UP 0x0017A4770800 iexgbe 10GBASE-KR lan900
lan1 UP 0x0017A4770800 iexgbe 10GBASE-KR lan900
lan2 UP 0x0017A4770808 iexgbe 10GBASE-KR
lan3 UP 0x0017A477080A iexgbe 10GBASE-KR
lan900 UP 0x0017A4770800 hp_apa hp_apa
lan901 DOWN 0x000000000000 hp_apa hp_apa
lan902 DOWN 0x000000000000 hp_apa hp_apa
lan903 DOWN 0x000000000000 hp_apa hp_apa
lan904 DOWN 0x000000000000 hp_apa hp_apa

 

<my_server> nwmgr -s -S apa -c lan901 -A links=2,3 -A mode=MANUAL
lan901 new values:
Links = ERROR: Invalid value
Not valid to set attribute Links as a Link Aggregate
parameter.

Mode = ERROR: Invalid value
Not valid to set attribute Mode as a Link Aggregate
parameter.

 

Thanks in advance for yours replies

 

Regards

Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 22,978
Registered: ‎10-02-2001
Message 2 of 4 (143 Views)

Re: Unable to create new APA

Try

# nwmgr -a -A links=2,3 -A mode=MANUAL -I 901 -S apa

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
Occasional Advisor
Tribute2U
Posts: 14
Registered: ‎11-05-2009
Message 3 of 4 (139 Views)

Re: Unable to create new APA

Yes !!! It works.

 

Thanks a lot, even if I don't understand the difference between these 2 commands, it works.

 

Thanks again.

 

Regards

Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 22,978
Registered: ‎10-02-2001
Message 4 of 4 (125 Views)

Re: Unable to create new APA

You are welcome. It is a problem of the syntax used.

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation