Re: NFS client fails to read DNFS disk (261 Views)
Reply
Honored Contributor
labadie_1
Posts: 1,221
Registered: ‎08-07-2003
Message 1 of 4 (481 Views)

NFS client fails to read DNFS disk

Hi All

 

Alpha VMS 7.3-2, Tcpip 5.4 Eco 7

 

I started NFS client, and want to "talk" to a Windows Server 2008 NFS Server (Microsoft NFS)

 

IRIS>tcpip mount dnfs1: /host=agbvsorawin/path="DIRUTL"/USER=DEFAULT/UID=-2/GID=-2
%TCPIP$DNFSMOUNT-S-MOUNTED, DIRUTL mounted on _DNFS1:[000000]
IRIS>
IRIS>dir DNFS1:[000000]
%DIRECT-E-OPENIN, error opening DNFS1:[000000]*.*;* as input
-RMS-E-DNF, directory not found
-SYSTEM-F-PROTOCOL, network protocol error
IRIS>sh dev dnfs1

Device                  Device           Error    Volume         Free  Trans Mnt
 Name                   Status           Count     Label        Blocks Count Cnt
DNFS1:          (IRIS)  Mounted              0  AGBVS$DIRUTL  79367224     1   1

 

IRIS>tcpip sh mount dnfs1/ful
%TCPIP$DNFSMOUNT-E-SHOWFAIL, error showing information for SYS$SYSROOT:[000000]DNFS1.;
-RMS-F-DEV, error in device name or inappropriate device type for operation

 

Wireshark says wet a

getattr error, header checksum error

 

Thanks for any hint

Please use plain text.
Honored Contributor
labadie_1
Posts: 1,221
Registered: ‎08-07-2003
Message 2 of 4 (478 Views)

Re: NFS client fails to read DNFS disk

By the way, while I know many logicals exist for debugging or modifying the behavior of Ftp/Lpd/Telnetsym...

 

I have been to find any logical for nfs client, to be more verbose, for example.

 

Did I miss something obvious ?

Please use plain text.
Honored Contributor
labadie_1
Posts: 1,221
Registered: ‎08-07-2003
Message 3 of 4 (420 Views)

Re: NFS client fails to read DNFS disk

It eventually works with /noadf

 

I am a bit disappointed, as I had planned to test with /adf=...

 

By the way, this is the first time I see a device in a MOUNTED state (not MOUNTED DISMOUNTED or MOUNTED UNAVAILABLE or...) that is in fact unavailable!

 

 

Please use plain text.
Occasional Visitor
DigiDim
Posts: 1
Registered: ‎09-19-2012
Message 4 of 4 (261 Views)

Re: NFS client fails to read DNFS disk

Hi, had the same issue in the same basic environment* as you, and the /NOADF worked for me too.

 

However now any attempt at accessing or doing a directory (or doing a TCPIP>DISMOUNT) on my DNFS1 gives me an access violation, e.g.

%DIRECT-E-OPENIN, error opening DNFS1:[000000]*.*;* as input

-RMS-E-PRV, insufficient privilege or file protection violation

 

On the server's share side's properties I had selected "No Server Authentication", "Enable unmapped user access", and Allow anonymous access" (w/ UID=-2, GID=-2).  In Share Permissions, "ALL MACHINES" has Read-Write access (and I've tried both with and without "Root Access Allowed"

 

On the VMS/Client side, I've tried your exact format of mount, and a few variations.  I had originally set up TCPIP$NOBODY -2, -2 in the Proxy table (/HOST=*), but noticing the NFS connection was done with user DEFAULT, changed the Proxy entry to User DEFAULT (and removed the Disuser flag from DEFAULT in UAF>).

 

BTW we don't have any actual Unix Attributes (GID/UID etc.) set up in our Windows environment.

 

Any clues/examples re your setup would be appreciated.

 

* Client on HP TCP/IP Services for OpenVMS Industry Standard 64 Version V5.6, OpenVMS V8.3

   NFS Server setup on Windows Server 2008 R2 Enterprise SP1

 

Thanks!

d.s.

 

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation