Re: Modifying the TELNET service. (296 Views)
Reply
Honored Contributor
The Brit
Posts: 1,291
Registered: ‎06-18-2007
Message 1 of 3 (304 Views)
Accepted Solution

Modifying the TELNET service.

I want to add the  "LOG_OPTION=ADDRESS"  to my TELNET service, (so that TT_ACCPORNAM includes the IP address, and not the hostname).

 

When I execute the command

 

TCPIP> set service TELNET /Log_Opt=address

 

The command is accepted (i.e. no errors), however show service/full does not show the option added!!

 

Do I have to cycle telnet to make this happen??

 

Dave.

Please use plain text.
Honored Contributor
The Brit
Posts: 1,291
Registered: ‎06-18-2007
Message 2 of 3 (303 Views)

Re: Modifying the TELNET service.

Sorry, forgot to add (for Steven)

 

TCPIP> show vers

HP TCP/IP Services for OpenVMS Industry Standard 64 Version V5.6 - ECO 5

on an HP BL860c (1.42GHz/6.0MB) running OpenVMS V8.3-1H1

 

thanks

 

Dave.

Please use plain text.
Honored Contributor
Volker Halle
Posts: 5,203
Registered: ‎04-26-2004
Message 3 of 3 (296 Views)

Re: Modifying the TELNET service.

Dave,

 

to change an option of the TELNET service, you have to disable and re-enable the service. This will cause all existing TELNET sessions to be disconnected.

 

Volker.

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation