Re: HP-UX 11i Version 3 - Commands for Network Administration. (433 Views)
Reply
Occasional Contributor
Grande_bart
Posts: 2
Registered: ‎03-20-2012
Message 1 of 3 (462 Views)

HP-UX 11i Version 3 - Commands for Network Administration.

Dear All,

 

I have two HP Blade bl860ci2 with cluster and teaming (Virtual IP). Each Balde have one Teaming IP (Virtual IP).

But, I don´t know the reason, one Blade lost the Teaming Conection (Virtual IP).

I need to know the commands in the HP-UX 11i Version 3 SO, how to do to Check The Teaming , How to change, How to Check, How to Test Teaming in the HP-UX 11i. Some Commands that can be useful.

 

Thank you very much.

 

Best Regard

 

GB.

Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 23,211
Registered: ‎10-02-2001
Message 2 of 3 (460 Views)

Re: HP-UX 11i Version 3 - Commands for Network Administration.

You should use nwmgr, examples:

# nwmgr -v -c lan900

# nwmgr -S apa

# nwmgr -g -v -c lan0

etc.

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
Esteemed Contributor
Modris Bremze
Posts: 337
Registered: ‎09-11-2009
Message 3 of 3 (433 Views)

Re: HP-UX 11i Version 3 - Commands for Network Administration.

lanscan [-v]

lanadmin

 

If you use HP Auto Port Aggregation, its documentation can be found here -> http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp...

 

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation