CIFS for OpenVMS: Slow connect, leaves ~400 lines in .LOG file (473 Views)
Reply
Advisor
Andreas Freiherr
Posts: 27
Registered: ‎04-28-2004
Message 1 of 3 (473 Views)

CIFS for OpenVMS: Slow connect, leaves ~400 lines in .LOG file

Fellow VMSers,

 

Here's another puzzle that I cannot solve myself.

 

Fresh installation of CIFS for OpenVMS V1.2 ECO1 on OpenVMS V8.4 (Integrity blade 870c i2), recent patches applied, including UPDATE-V0600, SYS-V0200, ACRTL-V0100, as well as PS00_1 and PS00_2 for Samba.

 

Samba configured as MEMBER SERVER in a Windows 2008R2 Active Directory domain (SECURITY=ADS).

 

When I connect (using SMBCLIENT on either Linux or OpenVMS), a long time (>25 seconds) passes after entering the password and before receiving the "smb: \>" prompt., even though both client and server are idle. Each attempt to connect leaves about 400 lines of text in the SAMBA$ROOT:[VAR]<servername>_<clientname>.LOG file:

 

[2012/05/25 13:26:20, 1] SAMBA$SRC:[SOURCE.NSSWITCH]IDMAP_TDB.C;1:(397)␊
  idmap uid range missing or invalid␊
  idmap will be unable to map foreign SIDs␊
[2012/05/25 13:26:20, 0] SAMBA$SRC:[SOURCE.NSSWITCH]IDMAP.C;1:(749)␊
  ERROR: Initialization failed for alloc backend, deferred!␊

 

These five lines repeat 79 times (for a 79*5 = 395 lines total, with the timestamps incrementing), followed by

 

[2012/05/25 13:26:34, 1] SAMBA$SRC:[SOURCE.SMBD]SERVICE.C;1:(1042)␊
  <clientname> (172.45.10.194) connect to service <sharename> initially as user <username>

At first, I tried with WINBIND disabled (first option in SAMBA$CONFIG), but turning it on and supplying IDMAP UID / IDMAP GID ranges does not change the situation. I need to have all VMS accounts created and mapped manually, rather than automatically by Samba.

 

Any ideas what may be amiss and how to get a connection within a reasonable amount of time?

 

Do I need to collect more information for you to give good advice?

 

Regards,

Andreas

 

Respected Contributor
Paul Nunez
Posts: 145
Registered: ‎05-07-2003
Message 2 of 3 (443 Views)

Re: CIFS for OpenVMS: Slow connect, leaves ~400 lines in .LOG file

Hi Andreas,

 

I saw a similar thing once that was related to DNS lookups.   When a client established a new session the cifs server was sending itself DNS name queries even though the system wasn't configured as a bind server.?.

 

After setting 'log level = 4' in smb.conf and duplicating the problem, the log file samba$root:[var]<hostname>_smbd.log revealed the delay (though it was 40 seconds):

 

[2011/08/26 14:02:10.546161, 3] SAMBA$SRC:[SOURCE.LIBSMB]NAMEQUERY.C;1:(1044)
  resolve_hosts: Attempting host lookup for name  AAP44<0x20>
[2011/08/26 14:02:50.558442, 3] SAMBA$SRC:[SOURCE.LIBSMB]NAMEQUERY.C;1:(981)
  resolve_lmhosts: Attempting lmhosts lookup for name AAP44<0x20>

 

(The <hostname>_smbd.log contains messages logged prior to the successful authentication of users.  Once authenticated, CIFS closes the smbd log and opens a <hostname>_<client-name>.log to which it logs all subsequent messages).

The source of the problem couldn't be found quickly, so they avoided it by changing the 'name resolve order' values from the default of:

 

    name resolve order = lmhosts wins host bcast

 

to

 

  name resolve order = lmhosts wins bcast

 

However, they are using DOMAIN, not ADS, security mode.   ADS security mode relies heavily on doing DNS name lookups to locate network resources (while DOMAIN security mode relies heavily on NetBIOS name resolution).   Thus, I don't think removing DNS from the 'name resolve order' is a viable option for you...

 

Paul

Occasional Advisor
Mark Hurcombe
Posts: 8
Registered: ‎04-02-2009
Message 3 of 3 (428 Views)

Re: CIFS for OpenVMS: Slow connect, leaves ~400 lines in .LOG file

Hi,

 

I just tried smbclient here and the response is instant to our domain controller or the VMS machine...

 

Here's an edited version of our core_smb.conf

 


[global]
netbios name = RX2600
workgroup = XXXXXX
security = ADS
require strongkey = yes
realm = XXXXXX.LOCAL
password server = ORCA
passdb backend = tdbsam
domain master = no
domain master = no
local master = no
preferred master = no
os level = 0
idmap uid = 6000-7000
idmap gid = 8000-9000
log file = /samba$root/var/%h_%m.log
username map = /samba$root/lib/username.map
printing = OpenVMS
load printers = no
[End of file]

 

We're using Winbind and also have an empty username.map in samba$root:[lib]

In the above Orca is the domain controller - this is Windows Server 2008 R2 and this is also the DNS server

RX2600 (very original) is the VMS machine

 

Did you successfully join the VMS machine to your domain during the CIFS install?

Have you started Kerberos?

 

Cheers,

 

Mark

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.