11-08-2013 03:40 AM - last edited on 11-10-2013 05:20 PM by Lisa198503
As per management request I need to configure auto port aggregation in 2 of our bl860C server having hp-ux 11.31 with having Oracle RAC.
In the network card it is showing
lan2 Not Configured
lan1 Not Configured
Here Lan0 (10.0.115) is my physical IP and lan0:801 (10.0.1.17) is the public virtual IP.
Please guide how to configure auto port aggregation for thsi setup and how to manage lan0:801 if I do apa between lan0 and lan2.
Appreciate for any help.
P.S. This thread has been moved from HP-UX>System Administration to HP-UX > networking. -HP Forum Moderator
11-08-2013 08:51 AM
Try this link for an APA Administrators Guide:
If that doesnt work for you, then tThis link should get you to page with the APA manuals:
11-08-2013 09:00 AM
Thanks for the reply. My concerned here is when I will do the configuration for apa using lan0 and lan2 but how to do the configuration for lan0:801
What should I do to change the configuration for lan0:801 which is the virtual ip of oracle RAC
11-08-2013 10:10 AM
Do you wish to utilize APA for both physical and virtual interfaces or just one? Why not use lan1 and lan2 to build the APA interface (lan900) and then migrate the interface(s) as required?
11-08-2013 10:15 AM
I am planning to do APA only for the physical and leave the virtual interface of Oracle RAC without touching it.
I can go by using lan1 and lan2 for creating APA for physical.
Could you please help me out with the steps to do this configuration.
Apprecaite your support.
11-08-2013 10:26 AM
Use the 'smh' command to start the management homepage menu. Select networking, networking interfaces and then apa. Press 'c' to start the configuration. The wizard should get things started for you.
View the manual I posted earlier for details on options, etc.
Lastly, know that ports on the network switch will need to be configured properly as well.
11-08-2013 10:57 AM
Well, the only thing you will need to be concerned of is the IP address changes. You cant just remove lan0 without removing the virtual IP, but you can change its IP address of course.
11-08-2013 11:03 AM - edited 11-10-2013 04:50 AM
Alright.. Thanks alot Bob
So I will tro to follow these steps
1. remove the IP address from lan0 for physical interface only. leaving the lan0:801 (virtual IP) as it is.
2. Configure the APA for lan1 & lan2
3. Assign the same IP of lan0 (Physical interface) to the new APA configured.
Is it fine?
11-08-2013 11:18 AM
Looks good, but I dont think you can remove the IP, but rather change it. Even if its to something like 0.0.0.0
Of course you should do this from the system console and not through a network connection you are going to change :-)
11-10-2013 05:51 AM
I need some more help on this issue..
Today I have an interaction with my SAN and network Administrator. As per their information what they are planning to do is as follows:
curently we have 2 core switch in our enviornment, 1 C7000 Blade enclosure having 4 BL860C server running with HP-UX 11.31. In the back of C7000 enclosure it is connected with 2 HP-VC Flex 10 Enet Module having 1 fibre connectvity in each card.
Currently we don't have network redundancy for our HP-UX serevrs because few HP-UX servers are connected with core switch 1 while other HP-UX servers are connected with core switch 2. In case one of the core switch goes down the serevr connected with that switch will also go down.
So to prevent from this situation what they are trying to do is create a new VLAN using core switch 1 & 2 and then from that VLAN give it to each HP-UX servers.
Now my concerned here is after doing this configuration how I am going to get at HP-UX OS side? Does thsi configuration will dissolve my all network configuration and I have to reassign it for Physical IP, Virtual IP and Private network?
After doing this configuration how the NIC details will be appearing at the HP-UX OS side and will the name change or it will still be same as lan0, lan1, lan2 lan3.
what details I should have before doing thsi configuration, curently I have save lanscan and netstat -nr O/P for mac address information.
Many thanks for any help in advance.
11-12-2013 11:18 AM
I assume you will get problems with the 2 IP addresses in the same subnet, read this:
Hope this helps!
There are only 10 types of people in the world -
those who understand binary, and those who don't.
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! star in the left column!