DHCP POOL & ROUTED INTERFACE

by Community Manager on ‎02-28-2012 07:10 AM

Question

I have 8206zl (J9477A) chassis with J9538A & J8702A Module.

 

1- How to configure DHCP Pool?

2- How to configure Routed Ports (To Assign the IP's directly on the Ethernet Interfaces)?

Answer

ProCurve switches don't yet have the option of configuring interfaces as router ports. (Comware switches do.) Just turn op IP routing and enable IP addresses on different VLANs.

 

ProCurve switches can't act as a DHCP server. For DHCP relay though, you want some thing like this:

 

vlan 30
   name "Wireless"
   untagged A1,B7-B8
   ip helper-address 172.20.100.69
   ip address 172.20.30.1 255.255.255.0
   exit

 

[PS: Since the ProCurve switches are effectively E Series, this post should really be in the E Series postings. Comware switches are effectively the A Series/H3C switches.]

Comments
by AlokV on ‎04-18-2014 02:52 AM

Can HP 1910 switch support to work as a DHCP server

Search
Showing results for 
Search instead for 
Do you mean 
HP Blog

HP Networking

Featured


Follow Us
Twitter Stream
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.