I have 8206zl (J9477A) chassis with J9538A & J8702A Module.
1- How to configure DHCP Pool?
2- How to configure Routed Ports (To Assign the IP's directly on the Ethernet Interfaces)?
ProCurve switches don't yet have the option of configuring interfaces as router ports. (Comware switches do.) Just turn op IP routing and enable IP addresses on different VLANs.
ProCurve switches can't act as a DHCP server. For DHCP relay though, you want some thing like this:
ip helper-address 172.20.100.69
ip address 172.20.30.1 255.255.255.0
[PS: Since the ProCurve switches are effectively E Series, this post should really be in the E Series postings. Comware switches are effectively the A Series/H3C switches.]
Can HP 1910 switch support to work as a DHCP server
How to use the "ip helper command" in HP layer 3 switch 5500 series