nnmsnmpwalk query for SNMPv3 devices (386 Views)
Reply
Honored Contributor
ramesh9
Posts: 1,067
Registered: ‎04-19-2011
Message 1 of 3 (386 Views)
Accepted Solution

nnmsnmpwalk query for SNMPv3 devices

Hi All

 

I need to run nnmsnmpwalk.ovpl for SNMP v3 devices in NNM 9.11.004 ( HP UX )

 

I had got following device details,

 

1)      Operation Mode – Auth No Priv

2)      User name:- NNM and Password – NNMV3

3)      Authentication – MD5

4)      No Privacy ( No Encryption)

5)      IP Address - 10.12.15.78

 

I tried constructing query using following command,

 

nnmsnmpwalk.ovpl -v 3 -a MD5 -v3u NNM 10.12.15.78

 

but it failed.

 

Please help

Please use plain text.
Honored Contributor
LindsayHill
Posts: 721
Registered: ‎11-16-2011
Message 2 of 3 (367 Views)

Re: nnmsnmpwalk query for SNMPv3 devices

Don't you need to also give it the password? Looks like you're only telling it the auth type.
CCIE 36708 | @northlandboy | lkhill.com
Please use plain text.
Regular Advisor
Chetan_J
Posts: 171
Registered: ‎01-02-2013
Message 3 of 3 (363 Views)

Re: nnmsnmpwalk query for SNMPv3 devices

Hi Ramesh,

 

You type incomlete command.

 

You need provide more option for snmp v3

 

1. SNMPv3 Authentication Protocol

2. SNMPv3 Authentication Passphrase

3. SNMPv3 Privacy Protocol

4. SNMPv3 Privacy Passphrase

5. SNMPv3 Context Name

6. SNMPv3 security name

 

Or 

 

You can refer HP NNMI Reference Pages pdf for more details.

 

Regards,

Chetan J

 

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation