11-30-2012 10:40 AM
Hello. I am trying to install the iSPI Performance for Metrics on a separate server from my NNMi application. I ran the nnmenableperfspi.ovpl script and get to the question asking for the FQDN of the remote server (the server which I will install the iSPI on). The script takes the FQDN name I input then returns an ERROR stating the domain names of the NNMi server and the iSPI server do not match. The script is picking up the short name of the NNMi server, not the FQDN of it.
Anyone know where this script is going to get the NNMi server name? Or how I can force the script to use the FQDN instead of the short name, or where in NNMi I can change it so it's the FQDN instead of the short name?
Solved! Go to Solution.
11-30-2012 11:44 AM
I would try to do the following command to set the FQDN nnmsetofficialfqdn.ovpl using the complete name after this I will execute again the command the nnmenableperfspi.ovpl.
For best practice please check the DNS names with the NSLOOKUP command to see what domains are configured .
The views expressed in my contributions are my own and do not necessarily reflect the views and strategy of HP
If you find this or any post resolves your issue, please be sure to mark it as an accepted solution Press kudos.