Re: cisco mibs (37 Views)
Reply
Valued Contributor
Werner Siewert
Posts: 138
Registered: ‎09-04-2001
Message 1 of 4 (37 Views)
Accepted Solution

cisco mibs

Hi,
we have NNM6.20 running on Win2000. Yesterday I tried to load some cisco mibs but always got this error message:
Error detected while loading mib file:...
This mib cannot be loaded until the following problem is corrected: Error defining object 'ciscoC2900MIB':Parent 'ciscoMgmt' not defined. Load the mib that defines 'ciscoMgmt' before loading this MIB.
Does anybody know which MIB defines ciscoMgmt?
I looked at the cisco pages, there are a lot of mibs but I could not find a MIB which defines 'ciscoMgmt'.
Any help would be highly appreciated.

Werner Siewert
Please use plain text.
Occasional Advisor
Pierre Bjarnfelt
Posts: 8
Registered: ‎01-14-2002
Message 2 of 4 (37 Views)

Re: cisco mibs

I had the same problem.
Load the CISCO-SMI.my, then load the other cisco mib.
That's it.

/Pierre Bjarnfelt
Please use plain text.
Valued Contributor
Werner Siewert
Posts: 138
Registered: ‎09-04-2001
Message 3 of 4 (36 Views)

Re: cisco mibs

it works. Thank you, Pierre.
But I still have Problems loading RMON2-MIB.my and HC-RMON-MIB.my. There is a MIB needed defining TokenRing...
Do you also know this MIB???

Werner Siewert
Please use plain text.
Occasional Advisor
Pierre Bjarnfelt
Posts: 8
Registered: ‎01-14-2002
Message 4 of 4 (36 Views)

Re: cisco mibs

Hi.
Try the TOKEN-RING-RMON.my It worked for me.

/Pierre
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation