Re: Updated SNMP trap configurations not displaying changed message format - NNM 9.10 (282 Views)
Reply
Occasional Visitor
Posts: 1
Registered: ‎06-06-2012
Message 1 of 3 (396 Views)

Updated SNMP trap configurations not displaying changed message format - NNM 9.10

I have modified the SNMP trap configuration for the following message format but i am not seeing the new format show up in the incident. I am using NNMi 9.10

 

CiscoLinkDown - .1.3.6.1.6.3.1.1.5.3.1.3.6.1.4.1.9 - Cisco Agent Interface Down (linkDown Trap) on interface $1

to the follow:

Interface $idn Down - $ifa

 

One thing i notcied is i had to add an author before i could save the new config but once saved i am not seeing the new format as being displayed i am still seeing the orginal Agent interface down msg,.

 

HP Expert
Posts: 253
Registered: ‎03-07-2012
Message 2 of 3 (362 Views)

Re: Updated SNMP trap configurations not displaying changed message format - NNM 9.10

Did you restart ovjboss process ? any changes?

HP Support
The views expressed in my contributions are my own and do not necessarily reflect the views and strategy of HP.
If you find this or any post resolves your issue, please be sure to mark it as an accepted solution, If you are satisfied with anyone’s response please remember to give them a KUDOS and show your appreciation.
Highlighted
Senior Member
Posts: 5
Registered: ‎04-12-2012
Message 3 of 3 (282 Views)

Re: Updated SNMP trap configurations not displaying changed message format - NNM 9.10

Hi,

 

change Cisco Agent Interface Down (linkDown Trap) on interface $1 

to on interface $sourceObjectName

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.