05-17-2011 10:29 PM
i am trying to unload mibs from NNMi 9.10, unloading operation was successful but in "Loaded MIBs" workspace in Configuration panel its appearing even after unloading the mibs. Even count is also not reducing.
Any reasons for this???
Solved! Go to Solution.
05-18-2011 03:16 AM
AFAIK The event reduction is not happened by unloading the MIBs, you have to disabled the loaded traps in the Incident Configuration.
- Say thanks by clicking the "Kudos! Star" which is on the left.
- Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.
05-18-2011 11:41 PM
sorry not event reduction, after unloading of mibs the count of Loaded mibs are not reducing in nnmi console. We have unloaded the mibs using "nnmloadmib -unload 'mib-file'". The operation was successful in the command prompt but the count is not decrementing in Loaded mib console.
Any suggestions, pls help
05-20-2011 05:40 AM
The idea with the file system was my wrong thinking.
The MIBs are still in the file system after unloading the MIB by the script. They will not be deleted.
User loaded MIBs will be stored under /var/opt/OV/shared/nnm/user-snmp-mibs/
System MIBs are stored under /opt/OV/misc/nnm/snmp-mibs/
If you are looking to the Application under Tools -> Load MIB...
There you have a part "Unloaded MIBs (User Provided)" and "Unloaded MIBs (NNMi Provided)".
Is the MIB there or is it under "Loaded MIBs"?
05-21-2011 09:58 AM
Hi , no, after unloading the mibs its still showing in " Configuration -> mibs -> Loaded mibs " workspace , even count is also not decrementing . where the loaded mibs information stored in nnmi db? is it in snmpmib.mib file ?