Re: Send mail on Alarm (20 Views)
Reply
Occasional Visitor
Fichot Laurent
Posts: 1
Registered: ‎04-13-2000
Message 1 of 8 (20 Views)

Send mail on Alarm

Hello,

I'm running an Eval version of NNM ... (6.1)
I just can't find the example of mail config on the online Help ! I swear i
tried!
I just want to send a mail on new alarm ( node down for ex! )
If anyone can give me a way to do it ...

Thank's
Occasional Visitor
Tim Deger_1
Posts: 4
Registered: ‎04-12-2000
Message 2 of 8 (20 Views)

Re: Send mail on Alarm

Hi there,

I don't believe there is a native command in HP OV to send mail. I am assuming
that you're using the NT version. This may not be what you really want to do,
but what I ended up doing was downloading the free version of Telamon Telalert
SE from www.telamon.com. This has both paging and SMTP e-mail capabilities and
plays very well with HP NNM.
Occasional Advisor
Gary Tomlin_2
Posts: 11
Registered: ‎03-08-2000
Message 3 of 8 (20 Views)

Re: Send mail on Alarm

I started a thread (Email from NNM/NT using mapisend.exe - 4/11/2000) about
using a free
utility from microsoft, mapisend.exe, which
allows emails to be sent from the command line.

I have been able to get this to work from the command
line but not as an external action which we are still
working on.

Thanks
GT
Advisor
Anonymous Coward
Posts: 15
Registered: ‎05-08-2000
Message 4 of 8 (20 Views)

Re: Send mail on Alarm

Tip...

issue the following as the action:

cmd /c start mailto:username@domain?subject="THESUBJECT"?body="Alarm with OV: "

Try different values within OV to see what kind of messages you have. You can define the sender, but it will use WHICHEVER account normally handles mailto: requests from the Start-> Run of NT.
"It wasn't ME"
Advisor
Anonymous Coward
Posts: 15
Registered: ‎05-08-2000
Message 5 of 8 (20 Views)

Re: Send mail on Alarm

Ok.. New info... The above DOES NOT work. It will brink up the mail window, but not actually send it!

Not all that useful.

Anon.
"It wasn't ME"
Advisor
Israel Briggs
Posts: 15
Registered: ‎05-25-2000
Message 6 of 8 (20 Views)

Re: Send mail on Alarm

This is a little bulky to set up, but it works quite well once it's there.

Using any scripting language supported by Windows Management Instrumentation Standard (PERL, Vbasic etc.) create a a script that generates a text message in the following format:
========== begin example =============

x-sender:
x-receiver:
x-receiver:
From:
To:
Subject:



================ end of example ======

Once the message file is created, move it to the PICKUP directory of the Windows SMTP mail service. Assuming the mail service is properly configured, it will be picked up and processed.

Izzy
Budda Smiles on you.
Advisor
William Yager
Posts: 35
Registered: ‎01-19-2000
Message 7 of 8 (20 Views)

Re: Send mail on Alarm

This works for sure. I implemented it about 2 weeks ago.

Use a freeware tool called "postie" avalable at http://www.infradig.com This is a command line e-mail tool which works well and efficiently.

Remember, any executable called as an alarm action either needs to be in the path or in the OpenViewbin directory. You'll need to put postie.exe there and if you choose to use the config file, postie.txt, that needs to be in that directory as well.

Additional instructions come with the download.

Good Luck.
Advisor
Armindo Guilamba
Posts: 26
Registered: ‎06-09-2000
Message 8 of 8 (20 Views)

Re: Send mail on Alarm

I have diferent option.

I am running NNM 6.10 on NT and a diferent machine running exchange server with no SNMP service running. I am using mapisend and it is working perfectly.
Everything I did was change the ovactiond.lrf to use a valid NT user that have account in exchange server to send messages.
Mapisend is a microsoft utility to send massages from the command line and must be executed with a valid domain user.

Good luck.


The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.