Re: NNMi integration with HP Service Health Reporter (SHR) (392 Views)
Reply
Occasional Contributor
Yasu_1
Posts: 6
Registered: ‎03-30-2011
Message 1 of 3 (424 Views)

NNMi integration with HP Service Health Reporter (SHR)

Currently I am running NNMi 9.01 in linux environment. It was installed by an engineer who has left the company.

I was able to find the postgress database username and reset the password in order to provide the required information for integration.

I am still having problems to find the correct port to conenct to. I checked the configuration file and these are the ports defined in file /opt/OV/misc/nnm/props/local/nms-local.properties on NNMi server.


jboss.http.port=80
jboss.jnp.port=1099
jboss.https.port=443
jboss.rmi.port=1098
jboss.jrmp.port=4444
jboss.pooled.port=4445
jboss.socket.port=4446
jboss.bisocket.port=4457
jboss.ws.port=8083
jboss.ejb3.port=3873
jboss.jmsControl.port=4458
jboss.sslbisocket.port=4459
jboss.ssljmsControl.port=4460

 

Only ports which it tried to connect are 8083, all others, I got error right away.

with 8083, it is timing out. So do not know which port to use.

SHR created URL to connect to NNMi server.

Here is the URL construction:  jdbc:postgresql://usplsvulx127.elabs.eds.com:8083

 

Thankyou

HP Expert
DSimon
Posts: 91
Registered: ‎04-04-2011
Message 2 of 3 (397 Views)

Re: NNMi integration with HP Service Health Reporter (SHR)

It looks like you are using the default port 80.  Try either:

 

http://<server>:80/nnm

or

http://<server>/nnm

 

where <server> is the server running NNMi

 

Also, make sure all services are running by issuing the command "ovstatus -v"

 

 

HP Support
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution, If you are satisfied with anyone’s response please remember to give them a KUDOS and show your appreciation.
HP Expert
Walinton
Posts: 162
Registered: ‎03-12-2012
Message 3 of 3 (392 Views)

Re: NNMi integration with HP Service Health Reporter (SHR)

Hello,

 

Let me first admit that I don't know the integration with SHR nor have I read the documentation :)

 

In your post you provided this connection string: "  jdbc:postgresql://usplsvulx127.elabs.eds.com:8083"

 

It looks like you're not trying to connect  to the NNMi Web Services (in that case you'll need the configured http port, 80 in your case) but instead, you're actually trying to connect to the embedded Postgres database.

 

If you're trying to connect to Postgres then you might want to try the default Postgres port 5432.

If you're trying to connect to Postgres from another server (not the NNMi server) then you will need to configure this file: http://www.postgresql.org/docs/8.3/static/auth-pg-hba-conf.html

 

Good luck!

HP Support
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.