NNM upgrade from 9.0 patch 5 to 9.2x (601 Views)
Reply
Occasional Visitor
Posts: 1
Registered: ‎04-18-2013
Message 1 of 3 (601 Views)

NNM upgrade from 9.0 patch 5 to 9.2x

Need advise on which latest version to move from NNM 9.0 to 9.20/9.21/9.22. We are running it in app failover with iSPi for performance

Pls suggest.

Trusted Contributor
Posts: 172
Registered: ‎06-13-2006
Message 2 of 3 (576 Views)

Re: NNM upgrade from 9.0 patch 5 to 9.2x

a little bit of information can be found here in this thread: HP-NNMI-Config-Export-data-to-9-20

although I do disagree with the recommended solution.

We cannot upgrade a production box to preserve the existing configuration for export onto a new machine.

 

My plan is to install a plain NNMi 9.01 P5 (old version) on a new machine, export config from the old box into the new one, and then upgrade the new one to 9.20.

 

HTH

Alexander

Regular Advisor
Posts: 175
Registered: ‎01-02-2013
Message 3 of 3 (550 Views)

Re: NNM upgrade from 9.0 patch 5 to 9.2x

Hi Praxi,

 

To upgrade HP NNM from 9.10 to 9.20, you need to apply patch level 5 on the HP NNM 9.10 then upgrade to 9.20.

 

In app failover mode you need to upgrade both i.e. DC and DR HP NNM server.

 

And

 

For the iSPI you have to do same procedure to upgrade to 9.20.

 


Regards,

Chetan_J

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.