Re: MIB Filter Variable: ifAlias (297 Views)
Reply
Occasional Contributor
CentroOperacion
Posts: 5
Registered: ‎11-21-2011
Message 1 of 2 (311 Views)
Accepted Solution

MIB Filter Variable: ifAlias

Hi all,

 

we want to poll the input errors in certain interfaces so we have defined a custom poller instance. The MIB expression is ifInputErrors and the MIB Filter Variable should be ifAlias but this MIB variable doesn't appears on the MIB tree.

 

The MIB tree starts on .1.2... and the ifAlias OID is .1.3... How can add this sub-tree? The ifAlias variable is correctly loaded on NNM. Any ideas?

Occasional Contributor
CentroOperacion
Posts: 5
Registered: ‎11-21-2011
Message 2 of 2 (297 Views)

Re: MIB Filter Variable: ifAlias

Solved.

 

The OID of the variable ifAlias is .1.3.6.1.2.1.31.1.1.1.18, however, this variable is found in the subtree .1.2.840.3.6.1.2.1.31.1.1.1.18 on NNM at least when you open del MIB tree to select the MIB variable Filter at the Custom Poller Section.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.