Re: HP OV NNM 7.53 can't receive snmp trap. No trap in Alarm Browser, but it is Wireshark sniff! (949 Views)
Reply
Occasional Advisor
dreel
Posts: 7
Registered: ‎05-17-2011
Message 1 of 3 (958 Views)
Accepted Solution

HP OV NNM 7.53 can't receive snmp trap. No trap in Alarm Browser, but it is Wireshark sniff!

[ Edited ]

HP OV NNM 7.53 working on Oracle Virtualbox machine.  Last two month it was working normally. But it won't working now.

I have reinstalled HP OV NNM 7.53 twice already.  

 

I send a test trap via snmpnotify and SNMPc Trap Send.

Wireshark receives a trap from SNMPc, but Alarm Browser don't show it.

HPOV processes work fine.

 

Can anyone know how to config it to receive snmp traps?

 

Frequent Advisor
Solari
Posts: 62
Registered: ‎01-08-2010
Message 2 of 3 (949 Views)

Re: HP OV NNM 7.53 can't receive snmp trap. No trap in Alarm Browser, but it is Wireshark sniff!

What particular trap is it? You may have an event defined that is set to discard or log only. Have you looked for the trap by OID in the Events manager?

Occasional Advisor
dreel
Posts: 7
Registered: ‎05-17-2011
Message 3 of 3 (935 Views)

Re: HP OV NNM 7.53 can't receive snmp trap. No trap in Alarm Browser, but it is Wireshark sniff!

I found out the Windows SNMP Service have been set to receive traps from the localhost only.

So changing it to "Receive SNMP Traps from any node" solves the problem.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.