11-19-2013 07:34 AM
I am in need to monitor HP / Dell
Dell PowerEdge R620
HP DL 380 G7
iLO monitoring through SNMP TRAP to NNM Station. How can i do that ? and what are the MIB's i needed to be updated to get this done ? Please advise.
- I have uploaded the following mib for dell system except ITassist as it showing pharsing error. and then tested with "Test Alert" in Dell iLO, but the NNM have not received any alerts. following mib s were uploaded.
11-19-2013 07:48 AM
But have you added the ILO originating address into the inventory ? It doesnt have a full SNMP agent so it'll be an IP only node, but NNMI out of the box will ignore traps from any non-inventory node or component thats not monitored.
Andy Kemp, CISSP
11-25-2013 06:12 AM
Yes, i haved added those IP addresses in nodegroup and then into monitoring. I have uploaded the mib's except few.
and tested from iLO for a send test alert. Still didnt receving any traps. :( am not sure what to do ?
11-27-2013 07:06 PM
Hello beb ,
can you use trapdump command to check if you are getting any traps in TrapDB ,
for using this command .
nnmtrapdump.ovpl -u system -p mypassword -source XXXX > /tmp/trapdump.txt
#nnmtrapdump.ovpl -u system -p mypassword > /tmp/Maytrap.txt
for realtime traps use nnmtrapdump.ovpl -t
Saying Thanks by hitting Kudos :)
HP AIS NNM-NA-OO