HP / DELL iLO Trap based monitoring (368 Views)
Reply
Valued Contributor
bebu
Posts: 114
Registered: ‎06-14-2011
Message 1 of 4 (368 Views)

HP / DELL iLO Trap based monitoring

Hi All,

 

I am in need to monitor HP / Dell

Dell PowerEdge R620

HP DL 380 G7

 

iLO monitoring through SNMP TRAP to NNM Station. How can i do that ? and what are the MIB's i needed to be updated to get this done ? Please advise.

 

  • I have uploaded the following mib for dell system except ITassist as it showing pharsing error. and then tested with "Test Alert" in Dell iLO, but the NNM have not received any alerts. following mib s were uploaded.

10892.mib 
adptinfo.mib 
baspCfg.mib  
baspStat.mib 
baspTrap.mib 
DcAsfSrv.mib
dcs3rmt.mib 
dcs3fru.mib
dcstorag.mib
dellcm.mib
INTELLAN.mib
ITassist.mib
rac_host.mib 

 

Regards,

BeB

Honored Contributor
AndyKemp
Posts: 739
Registered: ‎05-17-2010
Message 2 of 4 (365 Views)

Re: HP / DELL iLO Trap based monitoring

But have you added the ILO originating address into the inventory ? It doesnt have a full SNMP agent so it'll be an IP only node, but NNMI out of the box will ignore traps from any non-inventory node or component thats not monitored.

Have a nice day :)

Andy Kemp,  CISSP
Valued Contributor
bebu
Posts: 114
Registered: ‎06-14-2011
Message 3 of 4 (334 Views)

Re: HP / DELL iLO Trap based monitoring

Spoiler
Hi AndyKemp,

 

    Yes, i haved added those IP addresses in nodegroup and then into monitoring. I have uploaded the mib's except few.

 

and tested from iLO for a send test alert. Still didnt receving any traps. :( am not sure what to do ?

 

Regards,

BeB

Respected Contributor
mostafa_hassan
Posts: 264
Registered: ‎12-11-2011
Message 4 of 4 (317 Views)

Re: HP / DELL iLO Trap based monitoring

Hello beb , 

 

can you use trapdump command to check if you are getting any traps in TrapDB ,

 

for using this command . 

 

nnmtrapdump.ovpl -u system -p mypassword -source XXXX > /tmp/trapdump.txt

 

#nnmtrapdump.ovpl -u system -p mypassword > /tmp/Maytrap.txt

 

for realtime traps use nnmtrapdump.ovpl -t

All the best .
Saying Thanks by hitting Kudos :)

Regards
Mostafa Hassan
HP AIS NNM-NA-OO
CCNA-CCNP-ITIL-VCA-Cloud-VCA DataCenter
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.