Re: Guide for NNMi 9.20 and integration with uCMDB 10.0 (271 Views)
Reply
Advisor
tritsako
Posts: 32
Registered: ‎11-14-2012
Message 1 of 2 (301 Views)

Guide for NNMi 9.20 and integration with uCMDB 10.0

Hi to the Experts,

 

I have installed the NNMi 9.20 on RH and I need to make integration with uCMDB 10.0 for NNMi topology leyer2. But I have seen that this version of NNMi support integration with uCMDB 8.x and 9.x.

 

What do I have to do  to make the integration NNMi 9.20 and uCMDB 10.0? Have anyone done this before?

What steps do I have to follow? Any ideas or documents will be welcome.

 

BR

Costas

HP Expert
Keith_Paschal
Posts: 127
Registered: ‎11-08-2011
Message 2 of 2 (271 Views)

Re: Guide for NNMi 9.20 and integration with uCMDB 10.0

Costas;

 

Per the Discovery and Integration Content Guide (http://support.openview.hp.com/selfsolve/document/KM00642837) the integration between UCMDB 10.10 (and 10.01) supports NNMi version 8.1, 8.11 and 9.x.  The steps to perform to run the integration are in that same document as well.

 

Hope this helps!

 

Keith Paschal

HP UCMDB Support

Hope this helps,
Keith Paschal
"HP Support
If you find this or any post resolves your issue, please be sure to mark it as an accepted solution."

Click the KUDOS star on the left to say 'Thanks'
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.