10-13-2013 07:53 AM
I'm polling servers with NNMi 9.0, and some windows servers rerturn 20+ interfaces
There are 2 problems with the list of interfaces:
1. In some servers all interfaces are at "Not Polled" status
2. I want to filter the list, so that only IpV4 (or pther criteria) will be returned,because it causes problems with our CMDB integration
Thanks : )
10-14-2013 04:26 AM
1. No all interfaces are "connected" meaning that there is not information available that NNMI can build a logical connection between the server and another device in the inventory. You can force polling on these.
2. Easy, create a filter.
Andy Kemp, CISSP
10-14-2013 09:26 AM
I know that not all interfaces are connected, but 22 interfaces is not what I want to see as a SNMP result from a Microsoft server
Where can I crete a filter so that only the "Interfaces" tab at the nodes in the "Servers" group will be affected?
We must pay attention to the situation where the primary NIC fails, and the backup starts (teaming)
10-14-2013 03:50 PM
Please visit our new customer forum if you have a valid SAID support contract at the following link.
The views expressed in my contributions are my own and do not necessarily reflect the views and strategy of HP
If you find this or any post resolves your issue, please be sure to mark it as an accepted solution,If you are satisfied with anyone’s response please remember to give them a KUDOS and show your appreciation.