07-17-2012 06:30 AM
Is it possible that NNMi 9.10 discover only that devices which are communicationg with NNM using SNMP only.
I want to enable Auto discovery which shouldn't discover devices which is giving only ICMP response.
I have already provided community strings in 'Communication Configuration form'.
Is there anything else which i have to do before enable autodiscovery using ip range??
Solved! Go to Solution.
07-17-2012 12:01 PM
Just make sure you have the "Discover Non-SNMP Devices" Un-checked, and it should only find SNMP devices.
Also, check the "Discover Any SNMP Device", and it will use the community strings listed in the communication form to discover ANY SNMP device. Un-Check this box and it will only discover Routers and Switches (Limits discovery).
07-17-2012 10:43 PM
Thanks for your reply.
But where i get these option to check or uncheck.
Because in Communication Configuration page i am unable to found these option.
07-18-2012 01:17 PM
This option should be under Configuration > Discovery Configuration > Auto-Discovery Rules *TAB* > click new Auto-Discovery Rule. The form that pops-up should have the options you're looking for on the lower left and quadrant.