Re: NA configure as syslog server (574 Views)
Reply
Occasional Contributor
Akshatha_1
Posts: 10
Registered: ‎10-06-2009
Message 1 of 7 (624 Views)
Accepted Solution

NA configure as syslog server

Hello,

 

Can we configure NA as syslog server . What are all the information captured in NA from syslog message. Is NA syslog facility used only for configuration change management .

 

Regards

Akshatha

Please use plain text.
HP Expert
_paul
Posts: 228
Registered: ‎05-24-2012
Message 2 of 7 (617 Views)

Re: NA configure as syslog server

[ Edited ]

Hello Akshatha,

 

You can set on trace the following logs in Admin - Troubleshooting:  Device/Syslog, External/Syslog, Feature/Changedetection.

 

Then tail the file NA/server/log/syslog_wrapper.log and check the Syslog Messages coming to NA. 

 

NA will compare those against some patterns defined by the drivers and the users, and then trigger snapshots on devices for change detection feature. 

 

Let us know if you need more information.

 

Best regards,

Paul

Please use plain text.
Occasional Contributor
Akshatha_1
Posts: 10
Registered: ‎10-06-2009
Message 3 of 7 (601 Views)

Re: NA configure as syslog server

Thank you Paul.This information is really helped me.

 

 

Regards,

Akshatha

Please use plain text.
Occasional Contributor
Akshatha_1
Posts: 10
Registered: ‎10-06-2009
Message 4 of 7 (590 Views)

Re: NA configure as syslog server

Hello,

 

Does NA shows the syslog message in console ? Is it possible to get the all  syslog message if we use NA as SYSlog server ?

 

 

Regards,

Akshatha

Please use plain text.
HP Expert
_paul
Posts: 228
Registered: ‎05-24-2012
Message 5 of 7 (574 Views)

Re: NA configure as syslog server

Hello Akshatha,

 

You can use an external software for that, e.g. Wireshark, tcpdump

 

If this does not answer your question, please provide us with more details on what you need to achieve, as I might have misunderstood the last question. 

 

Regards,

Paul

Please use plain text.
Visitor
JSannac
Posts: 4
Registered: ‎03-13-2013
Message 6 of 7 (308 Views)

Re: NA configure as syslog server

Hi Paul,

 

But is it possible to view the content of the syslog_wrapper file in the web UI of NA?

Regards,

 

Jerome

Please use plain text.
HP Expert
Fcorella
Posts: 77
Registered: ‎05-25-2012
Message 7 of 7 (297 Views)

Re: NA configure as syslog server

Hello Jerome,

 

To help Paul and to answer you question, no it is not possible to view the content of the syslog_wrapper.log file in the web UI of NA. Depend of what are you looking for the recommendation as Paul mentioned is to use an external application as Wireshark, tcpdump.

 

All the syslog information are saved on the syslog_wrapper.log file.

 

Regards,

Fabian Corella T.
SW Premier Support Technical Consultant
HP Network Automation Certified Engineer
TSIA Certified Support Professional

The views and opinions expressed in my contributions are my own and do not necessarily reflect the views and strategy of HP

If you find that this or any other post resolves your issue, please be sure to mark it as an accepted solution.
If you are satisfied with anyone’s response please remember to give them a KUDOS by clicking on the STAR at the bottom left of the post and show your appreciation.
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation