NAS8000 smb share permissions (126 Views)
Reply
Occasional Advisor
Martin Megele
Posts: 9
Registered: ‎06-13-2000
Message 1 of 4 (126 Views)

NAS8000 smb share permissions

Hi,

i'm running a NAS8000 with User Level (Domain) Security for SMB (Windows) Shares. There are Windows NT Clients connected to the SMB share.

Does anyone know a way to asign permissions for the share itself?
Frequent Advisor
Saulius_1
Posts: 93
Registered: ‎05-05-2002
Message 2 of 4 (126 Views)

Re: NAS8000 smb share permissions

Maybe I misunderstood the question, but Isn't that the share properties tab ? I mean, you can assign username and password for host access.
Manual says:

If you configured your system to use share-level security, enter a read-only password and a read/write password and confirm them.

and

Share level security for Windows NT is the simplest security method available. ??Access to file volumes or directories (shares) may be restricted on a share by share basis. The administrator can set read only passwords and read/write passwords for each share on the system. Users wishing to gain access to a share are asked to supply the correct password. Only users with the correct password are given access to the share.

hope this will help somehow ?

Saulius
Honored Contributor
Vincent Fleming
Posts: 1,273
Registered: ‎06-08-2001
Message 3 of 4 (126 Views)

Re: NAS8000 smb share permissions

Hi;

I'm not a Windoze guru, but as I understand it from having to work with it, User-level security and Share-level security are mutually exclusive.

By this I mean that if you're using User-level security, you can't use share-level security also. It's one or the other.

The SMB sharing on the NAS8000 would adhere to this principal as also.

Good luck!
No matter where you go, there you are.
Occasional Advisor
Martin Megele
Posts: 9
Registered: ‎06-13-2000
Message 4 of 4 (126 Views)

Re: NAS8000 smb share permissions

Under WindowsNT you can set permission for files/directories
and for the Network-Share.

This is used to give users different kind of permissions when they access files locally (on the server) or over a network share.

for example somebody can have ful access on the files and read access on the share. If he then logs onto the server locally he has full access. If he connects to the share over the network he only has read access.

HP told me this is not implemented in th NAS8000 because you can't logon locally.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.