NAS 2000S RAID array working for approx 1 hour and then fails (1505 Views)
Reply
Occasional Visitor
Anup V S
Posts: 3
Registered: ‎04-07-2010
Message 1 of 5 (1,505 Views)
Accepted Solution

NAS 2000S RAID array working for approx 1 hour and then fails

Hi,
WE have a HP NAS 2000S Internal with Intel Xeon processor - 3.06GHz,2 gb ddr memory, 146 gb RAID HS hdd(4 no), 36.4 gb RAID hs hdd(2 no) os version:- Cent OS 5.3
RAID 0+1 configured with two 36.4 gb hdd and RAID 5 configured with four 146 gb hdd.

We had a peculiar problem of Hard disk failure. After working for 1 hour the led will turn red (Disk failure). But the smae disk is working in other servers.

We upgraded the firmwares hp smart array 5i+ to 2.76 and BIOS to P29. Same repeated and so we tried to change the cables, Motherboard, and finally we connected hp smart array 6400 with FW 2.84 but no improvement.

Any suggections and helps to solve this will be well appreciated.

Trusted Contributor
peyrache
Posts: 383
Registered: ‎09-01-2004
Message 2 of 5 (1,505 Views)

Re: NAS 2000S RAID array working for approx 1 hour and then fails

what is the operating system running on 2000S ?
JYP
Occasional Visitor
Anup V S
Posts: 3
Registered: ‎04-07-2010
Message 3 of 5 (1,505 Views)

Re: NAS 2000S RAID array working for approx 1 hour and then fails

Hi JYP,

Thanks for your courtesy in reply my query.
We concluded this to problem with SCSI Backplane. We are expecting the replacement by this week. After confirmation I will reply soon.

Thanks once again.
Trusted Contributor
peyrache
Posts: 383
Registered: ‎09-01-2004
Message 4 of 5 (1,505 Views)

Re: NAS 2000S RAID array working for approx 1 hour and then fails

ok let me know i"ll check logs otherwise
JYP
Occasional Visitor
Anup V S
Posts: 3
Registered: ‎04-07-2010
Message 5 of 5 (1,432 Views)

Re: NAS 2000S RAID array working for approx 1 hour and then fails

SCSI Backplane replaced and now problem solved. Thanks for all.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.