01-14-2004 05:42 AM
Solved! Go to Solution.
01-14-2004 10:45 AM
I don't know which operating system is running on the server but if it's NT/2K or 2k3, you could use Instant Top Tools for monitoring all your sensors. You can download it here: ftp://ftp.hp.com/pub/softlib/software2/COL3288/ns-
This will not only report all your temperature sensor readings but also fan speeds, memory failures, firmware revisions, and driver versions.
If you are running a different O/S such as Unix or NetWare, I couldn't give you any advice other than running ITT from the Navigator CD. I believe this would require downing the server and booting from the Navigator CD, though.
Hope this helps,
01-14-2004 11:12 AM
Here are the netserver MIB's. This should have what you need.
01-15-2004 03:51 AM
Temperature monitoring would be part of the overall system health. Some of the MIB's are specific to just DIMM mgmnt, SCSI, RAID, PCI, ect..
The hpnetctz.mib appears to monitor health traps.
-- hpHttpMgHealthTrap (deprecated)
-- hpHttpMgShutdown (deprecated)
-- NOTE - For those who want to implement a trap destination table, we
-- recommend using the trap destination section of the ICF mib.
I am not an expert on MIB's so I will have to do some more research as well.
03-24-2004 09:24 PM
I looked in the MIB files of your mail and I find the definition of the trap but not the OID for read the value with a simple SNMP Get.
Have you other informations ?
12-02-2010 05:01 AM
Hope this helps!
There are only 10 types of people in the world -
those who understand binary, and those who don't.
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! star in the left column!