Re: New processor in LC2000 and some other q (73 Views)
Reply
Occasional Visitor
lgorek
Posts: 1
Registered: ‎12-14-2008
Message 1 of 2 (73 Views)

New processor in LC2000 and some other q

I buy in this week an old HP LC2000 600Mhz with 2g ram, 6x18gb hdd.

And have some questions:

1. The power supply led blink at red, is it posible that the power supply i broken.

2. Now i have there a 600/256/133/1.65V processor can i put there a 1000/256/133/1.7V on the same VRM ?

3. The fan led blink red but i think its becouse the one fan is not working i must replace fan.

4. I made a raid 5. And when is one hdd broken how server show witch one ??

I'm from poland, and my english isn't so good.
Please use plain text.
Honored Contributor
e4services
Posts: 1,437
Registered: ‎01-07-2003
Message 2 of 2 (73 Views)

Re: New processor in LC2000 and some other q

The Manual:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/lpn10745/lpn10745.pdf

"RPS (Redundant Power Supply) LED has three
distinctive colors:
l steady Green for normal operation
l blinking Red at 1 Hz blink rate for a bad power
supply
l blinking Amber at 0.5 Hz blink rate for a
warning condition indicating a power supply
may not be working correctly."

2. Yes, VRMs are universal

3. The Manual:
"This Fan LED has three distinctive colors:
l steady Green for normal operation
l blinking Red at 1 Hz blink rate for a nonoperational
fan condition inside the NetServer
l blinking Amber at 0.5 Hz blink rate for a
warning condition indicating one of the fans
may be turning too slowly."

4. Status LED Activity Status LED
Off: Disk not present, or not
connected to the cage
Off: No disk activity
Green (solid): Disk present Green (flashing): Accessing disk
Green (solid for more than one
minute): Disk spinning up, or "hung"
Amber (flashing): Disk failure
predicted
Red (flashing): Disk failed
Red (solid): No +12 volt power
Hot Swap Hard Drives
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation