Re: HP Netserver LP1000r (1278 Views)
Occasional Visitor
Posts: 1
Registered: ‎12-27-2011
Message 1 of 2 (1,286 Views)

HP Netserver LP1000r



I have a question about an HP Netserver LP1000r.

Does this server have an integrated RAID controller?

Or must be an PCI board attached on the system?


Kind regards,



HP Pro
Posts: 182
Registered: ‎01-02-2012
Message 2 of 2 (1,278 Views)

Re: HP Netserver LP1000r

[ Edited ]




The LP1000R does not have an integrated RAID controller built into the system board. If you need it, you will have to install a separate SCSI RAID controller into the one available PCI slot.

The NetServer LP 1000r has an embedded dual-channel Ultra 3 Wide PCI SCSI controller. It has 2 Channels. Channel A is used for cabling to the hot swap hard disk cage. Channel B is connected to an external port for external SCSI devices.



For adding an additional Disk Array Controller (NetRAID), as per the documents available, HP recommends only using the NetRAID “1Si “ (D2140A) PCI board in Netserver lp 1000r


Part number: D2140-69004


Description: NetRaid-1Si one-channel disk array controller - PCI board with one internal 68-pin High Density and one external 68-pin Ultra High Density SCSI connector.



However, the above part is currently not available in production.




****You may also refer below HP document for HP Netserver LP 1000r  FAQ:





Helpful links:


Hope the info will help you :)





I am an HP employee.

Was this post useful? -
To say thanks click the "thumbs up" icon below!!! .....
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.