hp laserjet 9050mfp service code problem (906 Views)
Reply
Occasional Contributor
Richard Segbefia
Posts: 5
Registered: ‎08-04-2010
Message 1 of 2 (906 Views)
Accepted Solution

hp laserjet 9050mfp service code problem

Recently i replaced the accumulator assembly in 3000-stapler/stacker of hp laserjet 9050mfp.The information on the stapler controller says you must calibrate after replacing this part.The calibration procedure is in the service menu which requires service code to log in,but the service code i have in the service manual (09905004)is not working.Please any idea as to how to log into the service menu? Please help me.
Trusted Contributor
Steve Begley
Posts: 147
Registered: ‎10-26-2005
Message 2 of 2 (906 Views)

Re: hp laserjet 9050mfp service code problem

Hi,

You probably have the service code for the non-mfp 9050 - in the scanner service guide the service menu PIN is: 11905004.

Hope this helps - regards,

Steve.B.
Tea break over - back on yer heads!
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.