Set up an M2727nf to scan over the network (12784 Views)
Reply
Occasional Visitor
Mark522
Posts: 1
Registered: ‎08-05-2011
Message 1 of 7 (12,784 Views)

Set up an M2727nf to scan over the network

How do I set up the M2727nf MFP to be able to scan documents over the network?

 

In other words: the MFP is accessible to the network PC's via IP address.

 

Is it possible to use this MFP's scanning capability via that IP address?

 

Thank you.

Mark

Honored Contributor
TechPro
Posts: 1,293
Registered: ‎03-15-2002
Message 2 of 7 (12,781 Views)

Re: Set up an M2727nf to scan over the network

1. On a computer (preferably a server) setup a shared folder
2. At the M2727nf, through it's EWS, specify the server and share in the Scan to Folder settings.
3. Enjoy!
Occasional Visitor
Ashrut
Posts: 1
Registered: ‎01-09-2012
Message 3 of 7 (12,701 Views)

Re: Set up an M2727nf to scan over the network

Can you provide details on the steps to follow for configuration on the MFP

HP Pro
Askme
Posts: 691
Registered: ‎09-18-2011
Message 4 of 7 (12,694 Views)

Re: Set up an M2727nf to scan over the network

Yes, every one connected to this printer using network connectivity can use it for scanning through network.

 

But on each computer the scanning software (provided with printer) should be installed & configured.

 

Scan could be initiated from the PC (default option after installing software)

 

If one wish to initiate scan from printer, then Send to PC destination needs to be created & configured.

 

Here is the HP web link providing step by step configuration instructions:

 

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...

 

Latest Full software could be downloaded from following link:

 

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3377076&lang=en&cc=us...

 

 

Please mark the post that solves your problem as Accepted Solution
Click the Kudos star if this was helpful. Thank You!

(Although I am an HP employee, I am speaking for myself and not for HP)
Occasional Visitor
msti
Posts: 1
Registered: ‎04-08-2013
Message 5 of 7 (9,420 Views)

Re: Set up an M2727nf to scan over the network

Hi, I need install de scanner MFP 2727 in the W2008 R2, is possible? how execute task? 

HP Pro
Askme
Posts: 691
Registered: ‎09-18-2011
Message 6 of 7 (9,406 Views)

Re: Set up an M2727nf to scan over the network

Only print function will be supported for Win 2008 R2, here is the HP web link to download the print drivers:

 

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3377076&...

 

 

Please mark the post that solves your problem as Accepted Solution
Click the Kudos star if this was helpful. Thank You!

(Although I am an HP employee, I am speaking for myself and not for HP)
Frequent Visitor
Merwin
Posts: 3
Registered: ‎04-18-2012
Message 7 of 7 (8,770 Views)

Re: Set up an M2727nf to scan over the network

We now have the full solution software avaialable on the HP website. This should allow you to scan as well like it did on the WIN 7

 

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.