Re: HP3200 printing condensed form in DOS (191 Views)
Occasional Visitor
Posts: 2
Registered: ‎03-06-2001
Message 1 of 2 (191 Views)

HP3200 printing condensed form in DOS

Is there a driver available that would allow the 3200 to print a condensed DOS document? I have not been able to find a solution yet. Batch file perhaps?
A journey of a thousand miles begins with a single step.
Honored Contributor
Posts: 3,664
Registered: ‎10-03-2000
Message 2 of 2 (191 Views)

Re: HP3200 printing condensed form in DOS


Try this command in a DOS batch file:


This will give you 12 characters per inch Courier. If you need more characters per inch, play around with the 10h12v... 10h is 10 point, 12v is 12 characters per inch.

You might consider getting a Technical Reference manual which outlines all PCL commands, as well as the PJL language. Here's a web site to get information on this bundle:

Good luck!

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.