HP LaserJet M1522nf freezes up and will not print (9603 Views)
Reply
Outstanding Contributor
Posts: 15,664
Registered: ‎02-27-2006
Message 26 of 29 (744 Views)

Re: HP LaserJet M1522nf freezes up and will not print

Glad it worked for you. I knew it would as I have baked over 50 of these boards and have only had to re-bake 3 of them over the last few years. This issue was caused by cold solder joints that develop on the main processor and baking re-flows the solder to correct the problem. Also works on P2015 formatters and jet direct card models 610N and 615N.
Occasional Visitor
Posts: 2
Registered: ‎01-18-2014
Message 27 of 29 (694 Views)

Re: HP LaserJet M1522nf freezes up and will not print

[ Edited ]

jaltman,

 

I have the exact same HP freeze problem.

 

I looked at the manual and can't find and locate how to remove the formatter board in question.

I have the M1522NF.

 

Can you please elaborate?

 

thanks,

 

Rob

Occasional Visitor
Posts: 2
Registered: ‎01-18-2014
Message 28 of 29 (685 Views)

Re: HP LaserJet M1522nf freezes up and will not print

[ Edited ]

jaltman,

 

Never mind.

 

By doing a google search for "Where is the formatter board located for HP M1522nf" I found a great YouTube that shows everything step by step.

 

file:///C:/TEST/HP%20M1522nf%20formatter%20YouTube%20%232.htm

 

 

Occasional Visitor
Posts: 1
Registered: ‎12-07-2014
Message 29 of 29 (122 Views)

Re: HP LaserJet M1522nf freezes up and will not print

can you please send me a copy of the service manual for the M1522nf?

The link in the posted message does not direct me to the manual.

 

I would like to try the baking solution.

 

Thanks.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.