Error:0x031e4dd6 (90 Views)
Reply
Occasional Visitor
Tomljanovic
Posts: 1
Registered: ‎03-02-2006
Message 1 of 3 (90 Views)

Error:0x031e4dd6

Also on the display is "798:lib_barracuda.c" I have tried unplugging the power and reconnecting. Same error appears on start up.

This link also didn´t also work:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00489814

Can somebody help me?
Honored Contributor
Chandan Kumar_1
Posts: 1,159
Registered: ‎04-15-2005
Message 2 of 3 (90 Views)

Re: Error:0x031e4dd6

Hi,

Make sure unit is connected directly to the wall jack.

If still persists, unit need to be get serviced.

Chandan
Learn. Share. Inspire.
Frequent Advisor
Jagannadh
Posts: 25
Registered: ‎03-08-2006
Message 3 of 3 (90 Views)

Re: Error:0x031e4dd6

Make sure unit is connected directly to the wall jack.

After connecting the printer to the wall jack , perform the steps below.
Steps to perform the POwer cycle.
1. Remove all the cables from the printer except the power cord,
2. Turn on the All-in-One.
3. Remove the power cord with the printer switched on.
4. Wait for 30 seconds.
5. Plug in back the power cord and let me know.
If still persists, Please check the warranty of the unit and replace it.
If the unit is not under warranty , it needs to be serviced.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.