11-21-2012 02:23 AM
i am trying to team two MSM 765ZL modules and i am not able to do that..please help me in this since it is very urgent to my client...
the two cores are connected with a 10 gig trunk cable.
if you have any good document with pictures and the exact steps to do it, will be much better.
hope to hear from you soon.
11-21-2012 08:50 AM
Been a few years since I did this last but... make sure the LAN ports are in the same subnet and reachable from the other controller, and configure one of the controllers as team master. Maybe need to reboot the other controller before it can join. Its outlined pretty good in the documents I think.
CCIE Service Provider
MASE Network Infrastructure 
11-22-2012 03:05 AM
actually, everything working fine with the physcal connections but i am not sure if i did it correctly.
the teaming configured correctly but the manager controller deteced the member but it halts on the waiting for acceptance status...not sure why,,any clues???
02-27-2015 06:18 AM
Did you solve this Problem?
i have got the same problem today.
2 Controller; first one upgarde to team manager; second controller joined to the team.
err cfg2openvpn-server: Could not get SC team member info from MAC address.
info cfg2openvpn-server: SC team member config not found yet. Retrying....
03-16-2015 05:15 AM - edited 03-16-2015 05:15 AM
1. Ensure your Default Route points to LAN or Internet port subnet - not to a VLAN
2. With the member controller only provide appropriate IP addresses and Default Route - no other configuration
3. If you have MSM765 controllers, ensure there's no rate-limiting in the controller ports
That should do it.
HP Networking Engineer