Re: MSM760 - Problem with DHCP (393 Views)
Reply
Occasional Contributor
Fredrik Wellner
Posts: 7
Registered: ‎10-13-2010
Message 1 of 3 (393 Views)

MSM760 - Problem with DHCP

Hello,

I have a MSM 760 with MSM410 AP:s, firmware revision 5.4.1.0-01-9131

The clients doesn't get any dhcp leases. The client vlan is routed by a Cisco and the dhcp server is a Windows server. If I connect with a cable to the vlan I get an address. I have set up WPA-PSK on the VSC, the authebntication works.

It seems that there has been an "Allow traffic between wired clients and tunneled wireless clients" in earlier revisions. I can't find this box anywhere in the controller.

I have mirrored the traffic from/to the AP and the feeling I get is that broadcast traffic reaches the network from the client but unicast doesn't.

Any idea why this doesn't work?

Cheers

Fredrik
Regular Advisor
Trevor Commulynx
Posts: 113
Registered: ‎01-11-2006
Message 2 of 3 (393 Views)

Re: MSM760 - Problem with DHCP

is the AP offloading Traffic or is it being terminated at the controller?
Occasional Contributor
Fredrik Wellner
Posts: 7
Registered: ‎10-13-2010
Message 3 of 3 (393 Views)

Re: MSM760 - Problem with DHCP

Hi, Thanks for your answer.

The AP is offloading traffic to the local network. The clients is using the same vlan as the AP:s.

Cheers!

/Fredrik
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.