MSM430 Connect to ProCurve 2530 No Ethernet LED Indicator (225 Views)
Reply
Occasional Visitor
Shuan
Posts: 1
Registered: ‎02-13-2014
Message 1 of 2 (225 Views)

MSM430 Connect to ProCurve 2530 No Ethernet LED Indicator

Dear all,

 

I'm new to MSM430.

I've problem accessing the web interface of our new unit.

After guided by HP support, I've flushed the recovery image provided and managed to access web interface using LAN cable (through PoE Injector).

 

After configured, I connect MSM430 to our ProCurve 2530(through PoE Injector as well) and there's no Ethernet LED on the device.

 

Did I miss out anything?

 

Regards,

Shuan

Trusted Contributor
Arimo
Posts: 303
Registered: ‎04-24-2009
Message 2 of 2 (183 Views)

Re: MSM430 Connect to ProCurve 2530 No Ethernet LED Indicator

This doesn't seem like an MSM issue. I'd look at the PoE injector first.

HTH,

Arimo
HP Networking Engineer
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.