Re: MSM 720 Controller Weired Captive Portal (1329 Views)
Reply
Occasional Contributor
Posts: 4
Registered: ‎09-03-2012
Message 1 of 3 (1,876 Views)
Accepted Solution

MSM 720 Controller Weired Captive Portal

Hello HP community,

 

I've got a question regarding the MSM 720 Wireless Controller...

We're using the controller for an internal wlan and guest wlan. The guest wlan is access controlled and users has to authenticate via html login. Everything is working perfect ... Now we'd wanted the captive portal also to be working for our weired guests ..

Can anybody tell me if we can use the html login function frmo the MSM controller also for weired users ?

 

Thank You

Chris

Trusted Contributor
Posts: 341
Registered: ‎04-24-2009
Message 2 of 3 (1,856 Views)

Re: MSM 720 Controller Weired Captive Portal

Hi

 

Configuration guide page 252 has a table explaining this. Not supported. You can only use 802.1x or MAC-based authentication for wired users.


HTH,

Arimo
HP Networking Engineer
Highlighted
Occasional Contributor
Posts: 4
Registered: ‎09-03-2012
Message 3 of 3 (1,329 Views)

Re: MSM 720 Controller Weired Captive Portal

Hi,

 

just for information .. got it working!

Configured a vlan ingress mapping on the controller ... the wired access port has to be configured to access the guest vlan

The controller acts as DHCP Server in that segment

 

BR

Chris

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.