Re: Not able to record Web(HTTP/HTML)+Flex Multi-Protocol in LR 12! (341 Views)
Reply
Occasional Contributor
DaveM1204
Posts: 7
Registered: ‎05-02-2014
Message 1 of 5 (435 Views)
Accepted Solution

Not able to record Web(HTTP/HTML)+Flex Multi-Protocol in LR 12!

Hi guys,

 

We upgraded to LR 12 recently from LR 11.52 and we are not able to select Web(HTTP/HTML)+Flex Multi Protocol in this version. We could record that in LR 11.5 and 11.52 without any issues but after upgrading, it won't support these 2 protocols together.

Is there a patch to be installed or am I missing something here?

 

Need your help guys..

HP Expert
rleitons
Posts: 146
Registered: ‎07-21-2009
Message 2 of 5 (402 Views)

Re: Not able to record Web(HTTP/HTML)+Flex Multi-Protocol in LR 12!

Hi Dave

By default Flex record HTTP/HTML transactions.

Starting with this version the “Create a New Script” window has this new feature, select the compatible vuser that is possible record together.

 

Rodolfo Leitón

HP LR/PC Support

If you are customer you can try posting on our internal forums for more personalized support.

For LoadRunner here.
For Performance Center here.

If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.

If you found this information useful please leave a kudo.

Occasional Contributor
DaveM1204
Posts: 7
Registered: ‎05-02-2014
Message 3 of 5 (379 Views)

Re: Not able to record Web(HTTP/HTML)+Flex Multi-Protocol in LR 12!

Hi Rodolfo,

 

I tried using only Flex, but it could not record the Web calls.

 

Actually, The application redirects to a web page after a certain step and the rest of the transactions are carried on in the browser only. If I am using only flex, it is capturing only the Flex calls and not the web calls.

 

I have even tried with various recording and port-mapping options, but nothing helped.

 

Is there any path available for LR12 to enable Flex- Web(HTTP/HTM) multi-protocol recording?

 

Thanks,

Dave.

HP Expert
rleitons
Posts: 146
Registered: ‎07-21-2009
Message 4 of 5 (370 Views)

Re: Not able to record Web(HTTP/HTML)+Flex Multi-Protocol in LR 12!

Hi Dave,

Please try to clean the windows cache, first.

 

If that not works:

1- Create a new multi - Flex script, just select Flex protocol.

2- Save the script and close the Solution.

3- Go and open the .usr of this script

4- Change the following lines:

         ActiveTypes=FLEX,QTWeb
         GenerateTypes=FLEX,QTWeb
         AdditionalTypes=FLEX,QTWeb

5- Open again the script, you will see the both protocol like LR11.50x

 

As I commented, Flex record AMF, Web and Flex transactions. If that is not working and worked in previous version I suggest open a support ticket to check more in deep.

 

Rodolfo Leitón

HP LR/PC Support

If you are customer you can try posting on our internal forums for more personalized support.

For LoadRunner here.
For Performance Center here.

If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.

If you found this information useful please leave a kudo.

Occasional Contributor
DaveM1204
Posts: 7
Registered: ‎05-02-2014
Message 5 of 5 (341 Views)

Re: Not able to record Web(HTTP/HTML)+Flex Multi-Protocol in LR 12!

Thanks Rodolfo,

 

I was able to record both flex and web calls.

 

Also, I noticed that the web calls were not getting recorded when using Google Chrome, but it was getting recorded in IE9 (I had to manually change my default browser to IE9 for this.)

 

-Dave

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.