LR Upgrade (323 Views)
Reply
Contributor
looe
Posts: 19
Registered: ‎05-09-2012
Message 1 of 3 (323 Views)

LR Upgrade

Hi ,

 

I have 500 web2.0 vusers license running on version8. Can i use this same license key in my new v11 controller?

 

Will my scripts also be supported as well?

 

Also what information is in the eltu key for vusers:

  1. Controller name
  2. Version?
  3. Protocol
  4. No. of vusers

Thanks.

HP Expert
KMadan
Posts: 1,090
Registered: ‎05-27-2009
Message 2 of 3 (320 Views)

Re: LR Upgrade

You can request the hp license team to convert the license to work with LR11.

License is depend on the Host id generated on a particular machine and the same license doesnt work on other machines. License includes the Vusers, protocols details.


Madan
HP Expert
Suerte13cr
Posts: 736
Registered: ‎09-14-2011
Message 3 of 3 (309 Views)

Re: LR Upgrade

If you are upgrading the machine where the current version of LoadRunner is installed. If you upgrade a different one then you have to request a new one since it changes the Host ID.

 

You can run scripts generated in prior versions of Vugen.

 

I am not sure what you mentioned with eltu keys? If its the license key it only carries protocol bundles, amount of vusers and monitors.

 

Regards,

Mario.

HP LR/PC Support

If you are customer you can try posting on our internal forums for more personalized support.

LoadRunner:
http://h30499.www3.hp.com/t5/LoadRunner-Support-Customer/bd-p/loadrunner-support-customer-forum

Performance Center:
http://h30499.www3.hp.com/t5/Performance-Center-Support/bd-p/performance-center-support-customer

How to:
http://www.youtube.com/watch?v=4ChlysWupWM

If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.