Hp Loadrunner Truclient Debug (644 Views)
Reply
Advisor
clientserverapp
Posts: 17
Registered: ‎06-29-2014
Message 1 of 4 (644 Views)
Accepted Solution

Hp Loadrunner Truclient Debug

Hi guys

please help me..it is my fault photos..I couldn't solve this problem since last week..

In the .rar file there was some photos about my project. I recorded it but I can't run.. You will see 7 and 8 photos....

In fact İt must be 7. photos but , when  init option pass to action option it became like 8.photos.  EKYS option on my page isn't seen ..Please help me.I couldn't this problem.. 

Advisor
Bach
Posts: 22
Registered: ‎01-22-2014
Message 2 of 4 (591 Views)

Re: Hp Loadrunner Truclient Debug

Is your application available somewhere so I can have a look?

 

Also, if you are using any proxy, please remove it, it may cause caching issue, and try to check/uncheck "Simulate new user on each iteration"

Advisor
clientserverapp
Posts: 17
Registered: ‎06-29-2014
Message 3 of 4 (573 Views)

Re: Hp Loadrunner Truclient Debug

I used default proxy setting and no-check  use a new user on each iteration and it worked :) thank you  

:)):) 

 

but then I converted it to webhtmlhttp and I replay it :) It didn't work.

Advisor
Bach
Posts: 22
Registered: ‎01-22-2014
Message 4 of 4 (549 Views)

Re: Hp Loadrunner Truclient Debug

[ Edited ]

http/html protocol may have some dynamic values which need to be correlated, please try to correlate if any. You can use Design Studio for the correlation.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.