Re: Does LoadRunner 11.52 support Siebel 8.2.2 by using Siebel Web protocol? (250 Views)
Reply
Occasional Visitor
jiuming
Posts: 1
Registered: ‎11-21-2013
Message 1 of 2 (266 Views)

Does LoadRunner 11.52 support Siebel 8.2.2 by using Siebel Web protocol?

When I replay the "Siebel - Web" protocol script, some errors occur:

 

Action.c(164): web_url("start.swe_7") started  [MsgId: MMSG-26355]

Action.c(164): Warning -26378: No buffer having "RelFrameID=1.2.1" has been received. The web_reg_save_param/reg_find request(s) specifying this RelFrameID will be handled as "not found"    [MsgId: MWAR-26378]

Action.c(164): Error -26377: No match found for the requested parameter "Siebel_SWEACn18". Check whether the requested boundaries exist in the response data. Also, if the data you want to save exceeds 1024 bytes, use web_set_max_html_param_len to increase the parameter size               [MsgId: MERR-26377]

Action.c(164): Error -26377: No match found for the requested parameter "Siebel_SWEVLC". Check whether the requested boundaries exist in the response data. Also, if the data you want to save exceeds 1024 bytes, use web_set_max_html_param_len to increase the parameter size               [MsgId: MERR-26377]

Action.c(164): web_url("start.swe_7") highest severity level was "ERROR", 248 body bytes, 226 header bytes     [MsgId: MMSG-26388]

Ending action Action.

Please use plain text.
HP Expert
GalShadeck
Posts: 46
Registered: ‎09-26-2011
Message 2 of 2 (250 Views)

Re: Does LoadRunner 11.52 support Siebel 8.2.2 by using Siebel Web protocol?

Hi,

The latest officially supported Siebel version is 8.1

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation