Controller is noy able to connect to loadgenerator (2090 Views)
Reply
Occasional Contributor
Posts: 9
Registered: ‎02-29-2012
Message 1 of 6 (2,090 Views)

Controller is noy able to connect to loadgenerator

Hi,

 

I have one problem ,any help will be appreciated.

 

I have Load runner controller 11 controller in Machine A(Win 7 64 bit).

The same machine is having load generator also.

I have installed Load generator 11 in a different machine B(Win 7 32 bit).

 

When i run a scenario with local host as load generator ,everything goes fine.

But when i try to use Machine B as load generator below exception comes.

 

07/09/2012 21:29:47 Error: Communication error: An error occurred while calling the CreateFileMapping function. (sys error message - Access is denied.

)     [MsgId: MERR-10344]

07/09/2012 21:29:47 Error: Two Way Communication Error: Function two_way_comm_create_acceptor failed.     [MsgId: MERR-60999]

07/09/2012 21:29:47 Error: Process "lr_bridge.exe" was not created. Reason: communication error.      [MsgId: MERR-29996]

07/09/2012 21:30:02 Error: Communication error: An error occurred while calling the CreateFileMapping function. (sys error message - Access is denied.

)     [MsgId: MERR-10344]

07/09/2012 21:30:02 Error: Two Way Communication Error: Function two_way_comm_create_acceptor failed.     [MsgId: MERR-60999]

07/09/2012 21:30:02 Error: Process "lr_bridge.exe" was not created. Reason: communication error.      [MsgId: MERR-29996]

07/09/2012 21:30:18 Error: Communication error: An error occurred while calling the CreateFileMapping function. (sys error message - Access is denied.

)     [MsgId: MERR-10344]

07/09/2012 21:30:18 Error: Two Way Communication Error: Function two_way_comm_create_acceptor failed.     [MsgId: MERR-60999]

07/09/2012 21:30:18 Error: Process "lr_bridge.exe" was not created. Reason: communication error.      [MsgId: MERR-29996]

07/09/2012 21:30:33 Error: Communication error: An error occurred while calling the CreateFileMapping function. (sys error message - Access is denied.

)     [MsgId: MERR-10344]

07/09/2012 21:30:33 Error: Two Way Communication Error: Function two_way_comm_create_acceptor failed.     [MsgId: MERR-60999]

07/09/2012 21:30:33 Error: Process "lr_bridge.exe" was not created. Reason: communication error.      [MsgId: MERR-29996]

07/09/2012 21:30:48 Error: Communication error: An error occurred while calling the CreateFileMapping function. (sys error message - Access is denied.

)     [MsgId: MERR-10344]

07/09/2012 21:30:48 Error: Two Way Communication Error: Function two_way_comm_create_acceptor failed.     [MsgId: MERR-60999]

07/09/2012 21:30:48 Error: Process "lr_bridge.exe" was not created. Reason: communication error.      [MsgId: MERR-29996]

07/09/2012 21:32:53 Error: Communication error: An error occurred while calling the CreateFileMapping function. (sys error message - Access is denied.

)     [MsgId: MERR-10344]

HP Expert
Posts: 14
Registered: ‎08-10-2011
Message 2 of 6 (2,069 Views)

Re: Controller is noy able to connect to loadgenerator

You could refer to this knowledge base doc - http://support.openview.hp.com/selfsolve/document/KM214124.

If this document does not help, you may need to commit a support case.

 

Good Luck

Member
Posts: 1
Registered: ‎12-20-2012
Message 3 of 6 (1,928 Views)

Re: Controller is noy able to connect to loadgenerator

this document said "You are not authorized to view this document"

Valued Contributor
Posts: 117
Registered: ‎04-30-2012
Message 4 of 6 (1,923 Views)

Re: Controller is noy able to connect to loadgenerator

You need to have authorized HP credentials to view KB.

 

just want to make sure, is the LoadRunner agent process running on the LG (Machine B)? if yes, is it running as a service or process?

 

same question for controller also, is it running as service or process?

 

Regards, Aj

Advisor
Posts: 30
Registered: ‎09-13-2012
Message 5 of 6 (1,300 Views)

Re: Controller is noy able to connect to loadgenerator

Is their a solution, I have the same problem with LR 11.52?

 

Jens

 

Occasional Visitor
Posts: 1
Registered: ‎12-05-2013
Message 6 of 6 (1,289 Views)

Re: Controller is noy able to connect to loadgenerator

I have the same problem. Any followup since February?

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.