vxdump and LTO tape size (66 Views)
Reply
Occasional Advisor
Lionel MAZE
Posts: 13
Registered: ‎12-03-2001
Message 1 of 4 (66 Views)

vxdump and LTO tape size

Hi,

When I do a backup of the 2 following filesystems on an LTO :
/dev/vg01/lvol3 102400000 98470416 3899008 96% /freezedata
/dev/vg01/lvol4 20971520 20688640 278516 99% /freezeapps

The first filesystem is entirely backup on the tape but not the second.
Why does another tape require whereas a tape can contain 200 GB and that I backed up hardly 100 GB?
+ vxdump -0 -B 200g -f /dev/rmt/2mn /freezedata
vxdump: Date of this level 0 dump: Tue Nov 26 23:01:17 2002
vxdump: Date of last level 0 dump: the epoch
vxdump: Dumping /dev/vg01/rlvol3 to /dev/rmt/2mn
vxdump: mapping (Pass I) [regular files]
vxdump: mapping (Pass II) [directories]
vxdump: estimated 196933852 blocks (96159.11MB) on 0.47 tape(s).
vxdump: dumping (Pass III) [directories]
vxdump: dumping (Pass IV) [regular files]
vxdump: 4.47% done, finished in 1:46
...
vxdump: 99.10% done, finished in 0:00
vxdump: vxdump: 98657170 tape blocks on 1 volumes(s)
vxdump: Closing /dev/rmt/2mn
vxdump: vxdump is done
+ vxdump -0 -B 200g -f /dev/rmt/2mn /freezeapps
vxdump: Date of this level 0 dump: Wed Nov 27 00:52:32 2002
vxdump: Date of last level 0 dump: the epoch
vxdump: Dumping /dev/vg01/rlvol4 to /dev/rmt/2mn
vxdump: mapping (Pass I) [regular files]
vxdump: mapping (Pass II) [directories]
vxdump: estimated 41006002 blocks (20022.46MB) on 0.10 tape(s).
vxdump: dumping (Pass III) [directories]
vxdump: dumping (Pass IV) [regular files]
vxdump: 14.39% done, finished in 0:29
vxdump: End of tape detected
vxdump: Closing /dev/rmt/2mn
vxdump: Change Volumes: Mount volume #2
vxdump: fopen on /dev/tty fails: No such device or address
vxdump: The ENTIRE dump is aborted.
lmaze
Occasional Advisor
Lionel MAZE
Posts: 13
Registered: ‎12-03-2001
Message 2 of 4 (66 Views)

Re: vxdump and LTO tape size

I am on HP-UX 11.00 with OnlineJFS.
lmaze
Honored Contributor
John Palmer
Posts: 1,842
Registered: ‎07-28-1997
Message 3 of 4 (66 Views)

Re: vxdump and LTO tape size

200Gb assumes a compression ratio by the drive of 2:1.

Do these filesystems consist mostly of data that's already compressed? If so, 100Gb is your limit.

Regards,
John
Occasional Advisor
Lionel MAZE
Posts: 13
Registered: ‎12-03-2001
Message 4 of 4 (66 Views)

Re: vxdump and LTO tape size

On /freezedata, there is only Oracle datafile that aren't compressed.
I use the same technique on another machine of development with the same data and an identical volumetry and that works.
Another idea ???
lmaze
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.