Re: re : adding san storage to hp rx2660 (143 Views)
Reply
Super Advisor
Vincent_5
Posts: 370
Registered: ‎04-02-2000
Message 1 of 5 (215 Views)

re : adding san storage to hp rx2660

[ Edited ]

Hi Guys,

     Can anyone advice, I have a rx2660 install with hpux 11iv3 configure with internal disk of 2 x raid 1 with 2 volume broup vg00 and vg01 created . inside the rx2660 I have a fibre card which is connected to a san storage . Can I know how to add this existing san stoarge and mount it on the rx2660 . Kindly advice??

 

 

Regards

Vincent

 

 

P.S. This thread has been moved from Integrity Servers to HP-UX > LVM and VxVM. -HP Forum Moderator

nothing is better than to know more
Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 23,208
Registered: ‎10-02-2001
Message 2 of 5 (195 Views)

Re: re : adding san storage to hp rx2660

It will depend on the SAN storage.

 

From the server side just scan for presented LUNs and create a new VG with LVOLs on it.


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
Super Advisor
Vincent_5
Posts: 370
Registered: ‎04-02-2000
Message 3 of 5 (169 Views)

Re: re : adding san storage to hp rx2660

Hi,

    There is existing data on the storage , I need to mount it to the new server. Can I have the steps to do it ??

 

Regards

Vincent

nothing is better than to know more
Please use plain text.
Honored Contributor
Robert_Jewell
Posts: 1,230
Registered: ‎06-26-2001
Message 4 of 5 (158 Views)

Re: re : adding san storage to hp rx2660

You say there is data on the LUNs that you want to save.  Were these LUNS ever mounted to an HP-UX server in the past?  If so, were they a part of a Volume Group?

 

From the server side, use the 'ioscan -fnN' command and look for the new LUNS.  if you need to create device files, use the 'insf -H' command as appropriate.

 

Use those device files and look into using the 'vgimport' command.

 

 

-Bob

Please use plain text.
HP Pro
S_Logan
Posts: 310
Registered: ‎10-11-2008
Message 5 of 5 (143 Views)

Re: re : adding san storage to hp rx2660

Hi Vincet,

 

 

You can Post a query in HPUX  Forum also. I understand, if you have data in the disk amd an you want to migrate it , need to do some vgexport/vgimport stuff.

 

HTH,

S_logan

I work for HP
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation