Re: LVM: /stand/rootconf is corrupted (51 Views)
Reply
Regular Advisor
Sharjeel Saleem
Posts: 153
Registered: ‎06-25-2006
Message 1 of 3 (96 Views)

LVM: /stand/rootconf is corrupted

Hi all,

 

We have a server RP7420 with running application data protector 6.1. Hardware and software both are end of support issue. We have system down situation due OS crash and giving dump.

 

We observed LVM: /stand/rootconf is corrupted event appeared prior to start dump.

 

Please let us what is the best recovery procedure to restore  /stand/rootconf.

 

Best Regards,

Sharjeel

Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 22,953
Registered: ‎10-02-2001
Message 2 of 3 (84 Views)

Re: LVM: /stand/rootconf is corrupted

See man lvlnboot or

 

http://h20566.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/resource.proc...

 

for more information.


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
Honored Contributor
sujit kumar singh
Posts: 1,228
Registered: ‎09-16-2006
Message 3 of 3 (51 Views)

Re: LVM: /stand/rootconf is corrupted

Man pages for lvlnboot shows the below, It is best idea to have a regular tape/net ignite backup of the systems so that these situations are avoided.


-c This command updates the /stand/rootconf file with the location of
the root volume in the currently booted volume group.
The /stand/rootconf file is used during maintenance-mode boots to
locate the root volume.
During normal boots (versus maintenance-mode boots, see hpux(1M) for
PA-RISC systems), this command is automatically executed by
/sbin/ioinitrc (see inittab (4)).
Since this command is performed during boot, it does not need to be performed
manually unless /stand/rootconf is missing (or alternatively,
performing a normal reboot will recreate this file).
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation