Re: 11iv2 and vgmodify (changing MAX PV) (248 Views)
Reply
Super Advisor
Tom Haddad
Posts: 330
Registered: ‎02-27-2007
Message 1 of 2 (252 Views)
Accepted Solution

11iv2 and vgmodify (changing MAX PV)

I have looking to change  the MAX PV setting on a VG

I de-activated the VG.  Say the MAX_PV is currrently 50 (and my ACT/CUR  PV is 50)..after running "vgmodify -t /dev/vgxxx", I was able to change it to 80 (as an example) without "renumbering", using "vgmodify -p xx /dev/vgxx"

 

I really want to double from 50 to 100, then I have to use the -n option.

When I run "vgmodify -p xx -n /dev/vgxxx" , its returns error saying extend 0 on certain PVs must be freed.

 

So I learned I need to move extent 0 to a free extent on the SAME DISK..using"pvmove /dev/dsk/cxxtyydz:0 /dev/dsk/cxxtyydz" but wait I cant!!  ALL PVS (extents) allocated/in use!

 

What do I do?

Super Advisor
Tom Haddad
Posts: 330
Registered: ‎02-27-2007
Message 2 of 2 (248 Views)

Re: 11iv2 and vgmodify (changing MAX PV)

think i have the answer.. I discovered that you can move extent 0 from disk X to ANY disk with free extents (in the same VG of course).  I will extend the VG by 1 free disk as i need...

 

Comments anyone??

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.